Cisco Systems DPC3827, EPC3827, 4039760 important safety instructions Wireless Advanced Settings

Configure Wireless Settings
	Section	Field Description
	Access Restriction	Access Restriction
		Allows you to permit or block computers from accessing the
		wireless network. The choice that you make here affects the
		addresses listed on this page. Choose one of the following
		options:
		 Block computers listed below from accessing the wireless
		network. Select this option to deny Internet access to the
		MAC addresses of the devices you list in the table. All
		other MAC addresses will be allowed Internet access.
		 Permit computers listed below access to the wireless
		network. Select this option to allow Internet access only to
		the MAC addresses of the devices you list in the table. Any
		MAC addresses not listed in the table will be denied
		Internet access

MAC Address FilterList

MAC Address Filter List

The MAC Address Filter List displays users whose wireless access you want to control. Click Wireless Client List to display a list of network users by MAC address. From the To Sort by drop-down menu, you can sort the table by IP Address, MAC Address, Status, Interface, or Client Name. To view the most up-to-date information, click the Refresh button.

Wireless > Advanced Settings

Your advanced wireless settings add another layer of security to the wireless network for your residential gateway. This page is used to set up the advanced wireless functions. Only an expert administrator should adjust these settings. Incorrect settings can reduce wireless performance.

Select the Advanced Settings tab to open the Wireless Advanced Settings page.

Use this page to configure the following options:

N Transmission Rate

CTS Protection Mode

Beacon Interval

DTM Interval

Fragmentation Threshold

88 4025083 Rev A