Cisco Systems 4039760, EPC3827, DPC3827 Normal Operations AC Power applied

Front Panel LED Status Indicator Functions

4	ONLINE	On
5	ETHERNET	On or Blinking
	1-4
6	USB	On or Blinking
7	WIRELESS	On or Blinking
	LINK
8	WIRELESS	Off
	SETUP
9	MoCA	On or Blinking

Normal Operations (AC Power applied)

The following chart illustrates the appearance of the residential gateway front panel LED status indicators during normal operations when AC power is applied to the gateway.

	Front Panel LED Status Indicators During Normal Conditions
	Front Panel Indicator		Normal Operations
	1	POWER	On
	2	DS	On
	3	US	On
	4	ONLINE	On
	5	ETHERNET	 On - When a single device is connected to the Ethernet port and
		1 - 4	no data is being sent to or from the modem
			 Blinks - When only one Ethernet device is connected and data is
			being transferred between the consumer premise equipment
			(CPE) and the wireless home gateway
			 Off - When no devices are connected to the Ethernet ports
	6	USB	 On - When a single device is connected to the USB port and no
			data is being sent to or from the modem
			 Blinks - When only one USB device is connected and data is
			being transferred between the consumer premise equipment
			(CPE) and the wireless home gateway
			 Off - When no devices are connected to the USB ports
	7	WIRELESS	 On - When the wireless access point is enabled and operational
		LINK	 Blinks - When data is being transferred between the CPE and
			the wireless home gateway
			 Off - When the wireless access point is disabled by the user
	8	WIRELESS	 Off - When wireless setup is not active
		SETUP	 Blinks - When wireless setup is active to add new wireless
			clients on the wireless network
4025083 Rev A			107