Cisco Systems 4039760 Status DOCSIS Status, Section, Field Description, Signal to Noise Ratio

Monitor Gateway Status
	Section	Field Description
		Signal to Noise Ratio
		Displays the signal to noise ratio in dBmv.
	Upstream Channels	Channel ID
		Displays the channel ID.
		Upstream Frequency
		Displays the upstream frequency in Hz.
		Modulation
		Displays one of the following modulation types currently in
		use:
		QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM, or 128 QAM
		Bit Rate
		Displays the Bit Rate in kBits/sec.
		Power Level
		Displays the upstream power level in dBmv.

Status > DOCSIS Status

Important: This page is only visible until the gateway goes online. After the gateway is online and registered on the network, this page is no longer visible.

The DOCSIS Status page displays a detailed status report of the DOCSIS status, Ethernet link status for each interface, QoS status, and configuration parameters for the residential gateway.

74 4025083 Rev A