Cisco Systems DPC3827, EPC3827 Access Restrictions Time of Day Rules, Block Access to Websites

Control Access to the Gateway

If the application you want to block is not listed, select User-Defined. Then, enter the port range and protocol for the service you wish to block.

To remove a block, select None from the Blocked Services drop-down menu.

Click the Save Settings button to save the policy settings.

Block Access to Websites

If you wish to block access to websites, use the Blocked Domain List or the

Keyword List

To use the Blocked Domain List, enter the URLs or domain names of the websites you wish to block.

Use the Keyword List to enter the keywords you wish to block. If any of these keywords appears in the URL of a website, access to the site will be blocked. Note that only the URL is check, not the content of each webpage.

Access Restrictions > Time of Day Rules

Use the Access Restrrictions Time of Day Rules page to configure web access filters to block all Internet traffic to and from specific network devices based on day of week and time of day settings that you select.

Select the Time of Day Rules tab to open the Access Restrictions Time of Day Rules Page. The following illustration is an example of the Access Restrictions Time of Day Rules page.

Note: The residential gateway uses the network time of day clock that is managed by your data service provider. The time of day clock must be accurate and represent the time of day in your time zone for this feature to operate properly. Verify that the Status and Set Time pages reflect the correct time of day. If they do not reflect the correct time of day, contact your data service provider. You can also adjust your settings to account for the difference.

4025083 Rev A 49