Cisco Systems EPC3827, DPC3827, 4039760 Applications & Gaming QoS, Wireless, No ACK

Configure Applications and Gaming

Applications & Gaming > QoS

Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as video conferencing. QoS settings allow you to specify priorities for different types of traffic. Lower priority traffic will be slowed down to allow greater throughput or less delay for high priority traffic.

Use the following table to configure the port range triggering for the residential gateway. Select enable for each feature you want to enable. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Section	Field Description
Quality of Service	WMM Support
(QoS)	Allows you to enable or disable Wi-Fi Multimedia (WMM)
Wireless
	support. WMM support is enabled by default. If WMM is also
	supported by your wireless clients, then voice and multimedia
	traffic will be given higher priority than other traffic

No ACK

Allows you to enable or disable No ACK. No ACK is enabled by default. This setting is recommended for voice, for which speed of transmission is important and packet loss is tolerable to a certain degree. If you select Disable, an acknowledge packet is returned for every packet received. This provides a more reliable transmission, but it increases traffic load, which decreases performance.

4025083 Rev A 99