Cisco Systems 4039760, EPC3827, DPC3827 Manage the Gateway, Administration Management

Manage the Gateway

Manage the Gateway

Administration > Management

The Administration Management page allows the network’s administrator to manage specific gateway functions for access and security. Select the Management tab to open the Administration Management page.

Important: The following page displays when DHCP (factory default) is the Connection Mode. The page that displays when Static IP is selected is shown and described later in this section.

Administration Management Page Description

Use the descriptions and instructions in the following table to configure the administration management for the residential gateway when DHCP or Static IP connection mode is selected. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Field	Description
Gateway Setup	Connection Mode: This setting allows you to determine how the
(WAN)	WAN (or gateway interface to the Internet) obtains its IP address.

56 4025083 Rev A