Cisco Systems EPC3827, DPC3827, 4039760 Applications & Gaming Port Range Triggering

Configure Applications and Gaming
	Section	Field Description
		Enable
		Check this box to enable port forwarding for the specified ports
		and IP addresses.

Applications & Gaming > Port Range Triggering

Port range triggering is a way to dynamically forward ports to a LAN PC that needs them at a particular time. That particular time is when it runs a certain application that performs some event that triggers the router. This event must be an outbound access of a particular port range.

Select the Port Range Triggering tab to open the Applications & Gaming Port Range Triggering page.

Applications and Gaming Port Range Triggering Page Description

Use the descriptions and instructions in the following table to configure the port range triggering for the residential gateway. Select enable for each. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

Section	Field Description
Port Range Triggering
Triggered Range	Start Port
	For the Start port, select a port from the recommended 49152 -
	65535 range. Keep in mind that ports used are program specific
	so check which ones the program requires to be forwarded.

	End Port
	For the End port, select a port from the recommended 49152 -
	65535 range. Keep in mind that ports used are program specific
	so check which ones the program requires to be forwarded.
96	4025083 Rev A