ClearOne comm PRO TH20, PRO 8I, SR 1212 PAA PA Adaptive Mode, Pacen PA Softclipper Enable, 256

Reserved 2 0

OFFA – Off Attenuation Mode

This command selects/reports the off attenuation value of a Mic channel.

Command Form: DEVICE OFFA <Channel> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3 (M)
Value	Unsigned	2	0.00 – 60.00
	Float		(Null to query in text)

PAA – PA Adaptive Mode

This command selects/reports PA adaptive mode for the specified Mic.

Command Form: DEVICE PAA <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3	(M)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

PACEN – PA Softclipper Enable

This command changes enables the softclipper function on a power amplifier channel.

Command Form: DEVICE PACEN <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned	2	0	= Off
	Short		1	= On
			2	= Toggle

(Null to query in text)

PAENergy – PA Energy-saver mode

This command switches the 36-volt rails off and on for the power amplifier. It is intended to be used for a low power or energy saving mode.

Command Form: DEVICE PAENERGY [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned	2	0	= Energy Saver Mode OFF (Power Amp On)
	Short		1	= Energy Saver Mode ON (Power Amp Off)

(Null to query in text)

256