PANGT – PA Noise Gate Threshold
This command sets the Noise Gate Threshold that will be used when in the manual mode. This represents the level at which the noise gate will activate.
Command Form: DEVICE PANGT <Channel> <Group> [Value]
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See Groups and Channels |
|
Group | Group | 1 | 23 (J) |
|
Value | Signed Float | 2 | dB | |
|
|
| (Null to query in text) |
|
PAPOL – Polarity Switch
This command changes audio signal polarity on a power amplifier channel.
Command Form: DEVICE PAPOL <Channel> <Group> [Value]
Argument | Type | Size | Values | Units | |
Channel | Channel | 1 | See Groups and Channels |
| |
Group | Group | 1 | 23 (J) |
| |
Value | Unsigned Short | 2 | 0 | = Normal |
|
|
|
| 1 | = Reverse |
|
|
|
| 2 | = Toggle |
|
|
|
| (Null to query in text) |
|
PARST – PA Reset
This command resets the power supplies on an individual power amplifier circuits. There is no query associated with this command.
Command Form: DEVICE PARST <Channel> <Group> [Value]
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See Groups and Channels |
|
Group | Group | 1 | 23 (J) |
|
Reserved | Zero | 2 | Zero |
|
PASME – PA Sound Mask Enable
This command enables the sound mask signal on a PA Channel
Command Form: DEVICE PASME <Channel> <Group> [Value]
Argument | Type | Size | Values | Units | |
Channel | Channel | 1 | See Groups and Channels |
| |
Group | Group | 1 | 23 (J) |
| |
Value | Unsigned Short | 2 | 0 | = Voice Mode |
|
|
|
| 1 | = Wideband Mode |
|
|
|
| (Null to query in text) |
|
PASML – PA Sound Mask Level
This command selects/reports the sound mask level on a PA channel.
Command Form: DEVICE PASML <Channel> <Group> [Amplitude]
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See Groups and Channels |
|
Group | Group | 1 | 23 (J) |
|
Amplitude | Signed Short | 2 | dB | |
|
|
| (Null to query in text) |
|