ClearOne comm PRO TH20 Pangat PA Noise Gate Activation Timer, Pangen PA Noise Gate Enabled, 259

PANGAT – PA Noise Gate Activation Timer

This command sets the Noise Gate activation timer. The noise gate will be activated if the timer conditions are met along with Gate thresholds.

Command Form: DEVICE PANGAT <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned Short	2	1 -16	Minutes
			(Null to query in text)

PANGEN – PA Noise Gate Enabled

This command enables noise gating on a PA Channel.

Command Form: DEVICE PANGEN <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned Short	2	0	= No Filter
			1	= High Pass
			2	= Low Pass
			3	= Hi and Low Pass
			(Null to query in text)

PANGF – PA Noise Gate Filter

This command sets either a High Pass or Low Pass filter to be used in the activation of the noise gate. This will affect the threshold conditions for activation of the gate. A low pass will remove noise floor contributions to gate threshold above 500 HZ. A high pass will remove noise floor contribution to gate threshold above below 2K.

Command Form: DEVICE PANGF <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned Short	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

PANGM – PA Noise Gate Mode

This command sets the Noise Gate mode to be either manual or automatic. In manual mode the gate threshold will be used to activate. In auto mode the noise floor will be used to activate.

Command Form: DEVICE PANGM <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned Short	2	0	= Automatic
			1	= Manual
			(Null to query in text)

259