ClearOne comm PRO TH20, PRO 8I Gate Gate Status, Gmode Gating Mode, Gover Gating Override, 244

GATE – Gate Status

This command reports the gate status of Mics. This command is read only.

Command Form: DEVICE GATE [Value]

Argument	Type	Size	Values	Units
Value	Hexadecimal	4	Bits 0 – 7 represent gate status on Mics 1 – 8
			(Null sent in text, Value returned)

GHOLD – Gate Hold Time Adjust

This command selects/reports the setting of hold time.

Command Form: DEVICE GHOLD <Channel> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3 (M)
Value	Unsigned Float	2	0.10 – 8.00	S
			(Null to query in text)

GMODE – Gating Mode

This command selects/reports the setting of gating mode.

Command Form: DEVICE GMODE <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3	(M)
Value	Unsigned Integer	2	1	= Auto
			2	= Manual On
			3	= Manual Off
			(Null to query in text)

GOVER – Gating Override

This command selects/reports the setting of gating override.

Command Form: DEVICE GOVER <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3	(M)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

GPIOSTATUS – General Purpose Status

This command sets the state of a General Purpose Status Pin.

Command Form: DEVICE GPIOSTATUS Pin Port [Value]

Argument	Type	Size	Values		Units
Pin	Unsigned	1	1	– 24 (Only user definable status pins.
	Integer
Port	Unsigned	1	1	– 2
	Integer
Value	Unsigned	2	0	= High
	Integer		1	= Low
			2	= Toggle
			(NULL to query in text)

244