ClearOne comm PRO TH20 Siggensweep Signal Generator Sweep, Sigtout Signal Generator Time Out, 268

SIGGENSWEEP – Signal Generator Sweep

This command starts the signal generator with a tone and does a sweep. If Repeat is 0, the signal generator will turn off after the sweep. If Repeat is 1, the signal generator will turn off after signal generator timeout. To stop the sweep, send a SIGGENEN command with a 0. During the sweep, the box will send out updated SIGGEN commands.

Command Form:

DEVICE SIGGENSWEEP <Channel> <Group> <Amplitude> <Start Frequency> <End Frequency> <Increment Frequency> <Rate> <Repeat>

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	1, 3, 7 (I, M, L)
Amplitude	Signed Float	2	-60.00 – 20.00	dB
Start	Unsigned Float	4	20.00 – 20000.00	Hz
Frequency
End	Unsigned Float	4	20.00 – 20000.00 (must be greater than the	Hz
Frequency			start)
Increment	Unsigned Float	4	1.00 – 20000.00	Hz
Frequency
Rate	Unsigned Integer	2	10 – 2000 ms	Hz
Repeat	Unsigned Integer	2	0 = repeat off
			1 = repeat on

SIGTOUT – Signal Generator Time Out

Sets the signal generator time out for the unit.

Command Form: DEVICE SIGTOUT [Value]

Argument	Type	Size	Values		Units
Value	Unsigned Integer	4	0	= Disable	Min
			1	– 30
			(Null to query in text)

SLVL – Speech Level Control

This command selects/reports the setting of Speech Level Control.

Command Form: DEVICE SLVL <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3	(M)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

SMTPSRV – SMTP Mail Server Address

This command selects/reports the IP address of the SMTP Mail server, and the Email Address the unit’s SMTP client sends messages to.

Command Form: DEVICE SMTPSRV [Value Address]
Argument	Type	Size	Values	Units
Value	IP Address	4	(Null to query in text)
			(0.0.0.0 Clears IP and String)
Address	String	40	1 – 40 characters
			(Null to query in text)

268