ClearOne comm PRO TH20, PRO 8I, SR 1212 operation manual Converge Pro TH20, 298

Converge Pro TH20

Telephone Audio Performance

•Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled

•Frequency Response: 250Hz to 3.3 kHz ±1dB

•THD+N: <0.3% re-max level 250 Hz to 3.3 kHz

•SNR: > 62 dB re-max level

Telephone Noise Cancellation

•Noise Cancellation 6-15 dB attenuation

Telco Line Echo Cancellation

•Tail Time: 31 ms

•Null: 55 dB nominal

Telco Line

•RJ-11

•POTS (plain old telephone service) or analog extension from a PBX)

•A-lead supervision provided

Telco Set

•RJ-11

•POTS (plain old telephone service) or analog extension from a PBX

•A-lead supervision provided

Audio Performance

•Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)

•Frequency Response: 20 Hz to 22 kHz ±1dB

•Rs=150 Ω

•THD+N: <0.02%

•Dynamic Range: 100 dB (non A-weighted)

•Crosstalk <-91 dB re 20 dBu @ 20 kHz channel to channel

Line Inputs 1, 2

•Push-on mini-terminal block, balanced, bridging

•Impedance: < 5 kΩ

•Nominal Level: 0 dBu

•Maximum Level: 20 dBu

Line Outputs 1,2

•Push-on mini-terminal block, balanced

•Impedance: < 50 kΩ

•Nominal Level: 0 dBu

•Maximum Level: 20 dBu

Expansion Bus In/Out

•Proprietary Network

•RJ-45 (2), 1.9 Mbps

•Category 5 twisted-pair cable, 200’ maximum cable length between any two Converge/Converge Pro devices

Ethernet

•Autoswitching with Quality of Connection (QoC)

•10/100 Mbps Ethernet Network Port

•10/100 Mbps Ethernet PC Port

•RJ-45 Connectors

RS-232

•Serial Command Protocol Only (Console software not supported on RS- 232 port)

•DB-9 female

•9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop bit, no parity

•Hardware flow control on (default)/off

USB

•Version 2.0 compatible

•Type: B-connector

Control/Status Ports

•DB-25 female A/B (2)

•Inputs A/B: active low (pull to ground)

•Outputs A/B: open collector, 40 VDC max, 40 mA each

•+3.3 VDC pins (2) (300 mA over-current protected)

Configuration & Administration Software

•Converge Console

Power Input Range

•Auto-Adjusting

•100–240 VAC; 50/60 Hz

Power Consumption

•30 W Typical

Dimensions (L x D x H)

•17.25” x 10.25” x 1.75”

•43.8 x 26 x 4.5 cm

Weight

•7.5 lbs/3.3375 kg unit weight

•12 lbs/5.4kg shipping

Operating Temperature

•14° F/-10° C to 122° F/50° C ambient unit temperature

Approvals

•See Appendix D: Compliance

•AES48-2005: AES standard on interconnections —Grounding and EMC practices — Shields of connectors in audio equipment containing active circuitry (self certified)

Part Number

910-151-820 Converge Pro TH20

Telephone Hybrid for Converge Pro 880, 880T, 840T, 8i, and Converge SR 1212

298