AVG – Adaptive Volume Gain
This command sets the maximum gain setting that the algorithm will not exceed.
Command Form:
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See GroupsAndChannels |
|
Group | Group | 1 | 23 (J) |
|
Value | Signed Short | 2 | 0.00 to +18.00 | dB |
|
|
| (Null to query in text) |
|
AVR – Adaptive Volume Reference
This command selects/reports the microphone or expansion bus reference channel to be used for adaptive volume tracking on a power amplifier channel.
Command Form: Device AVR [Channel] [Group]
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | (M) |
|
|
|
| (E) |
|
|
|
| (Null to query in text) |
|
Group | Group | 1 | 3, 6 (M or E) |
|
AVRT – Adaptive Volume Ratio
This command sets the ratio at which gain will be automatically applied based upon the ambient level in the reference microphone. Example: A 1:1 setting would apply 1 dB of gain for every 1dB rise in ambient level of the reference microphone up to the Max Gain setting.
Command Form: Device AVRT <Channel><Group> [Value]
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See GroupAndChannels |
|
Group | Group | 1 | 23 (J) |
|
Value | Unsigned Short | 2 | 0 = 2:1 | Ratio |
|
|
| 1 = 1:1 |
|
|
|
| 2 = 1:2 |
|
|
|
| (Null to query in text) |
|
AVT – Adaptive Volume Threshold
This command sets the level at which the adaptive volume algorithm will be activated. This value is referenced to the noise floor of the channel and the target above ambient for the adaptive volume to reach.
Command Form: | Device AVT <Channel><Group> [Value] |
| ||
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See GroupAndChannels |
|
Group | Group | 1 | 23 (J) |
|
Value | Signed Short | 2 |
| |
|
|
| (Null to query in text) |
|