ClearOne comm PRO 8I, PRO TH20 Eref Expansion Bus Reference, FE Feedback Elimination Enable, 239

ENETGATE – Ethernet Default Gateway Address

This command selects/reports the default gateway of the Ethernet port on the unit.

Command Form: DEVICE ENETGATE [Value]

Argument	Type	Size	Values	Units
Value	IP Address	4	(Null to query in text)

ENETSUBN – Ethernet Subnet Mask

This command selects/reports the Subnet mask of the Ethernet port on the unit.

Command Form: DEVICE ENETSUBN [Value]

Argument	Type	Size	Values	Units
Value	IP Address	4	(Null to query in text)

EREF – Expansion Bus Reference

This command selects an output or reports which output is the expansion bus reference. Command Form: DEVICE EREF <Channel> [Value Channel Value Group]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Reference Channels in Groups and Channels
Group	Group	1	8	(A, E)
Value	Channel	1	0	= none
			See 2, 20		(O, B) in Groups and Channels
			(Null to query in text)
Value	Group	1	0 for none or 2, 20 (N for none or O, B)

Event – Run Scheduled Event

This command manually runs a scheduled event on a unit. There is no query associated with this command.

Command Form: Device Event <Channel> <Group>
Argument	Type	Size	Values	Units
Channel	Channel	1	1 - 10
Group	Group	1	21 (Q)
Reserved	Unsigned Short	2	0

FE – Feedback Elimination Enable

This command enables or disables feedback elimination on the power amplifier channel. Command Form: Device FE <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See GroupAndChannels
Group	Group	1	23 (J)
Value	Unsigned Short	2	0	= On
			1	= Off
			2	= Toggle
			(Null to query in text)

FEB – Feedback Elimination Bandwidth

This command sets the filter bandwidth of the notch filter. Options are a Q = 5 or Q = 10 Command Form: Device FEB <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See GroupAndChannels
Group	Group	1	23 (J)

239