ClearOne comm PRO 8I, PRO TH20 Prgstring Program String, Pttthreshold Push to Talk Threshold, 263

PRGSTRING – Program String

This command sets/reports a programmed string.

Command Form:                    DEVICE PRGSTRING <ID> [Value]

Argument	Type	Size	Values	Units
ID	Unsigned Integer	4	0 – 7
Value	String	80	CLEAR = Clear current value
			1 – 80 Chars
			(Null to query in text)
			Special Characters:
			\a = alert
			\b = backspace
			\f = form feed
			\n = new line
			\r = carriage return
			\t = horizontal tab
			\v = vertical tab
			\\ = backslash

PTTTHRESHOLD – Push to Talk Threshold

This command selects/reports the setting of the push to talk threshold for a microphone.

Command Form: DEVICE PTTTHRESHOLD <Channel> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3 (M)
Value	Float	2	-100 to 0	dB
			(Null to query in text)

PUSHTOTALK – Push to Talk

This command selects/reports the setting of push-to-talk for a microphone.

Command Form: DEVICE PUSHTOTALK <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	3	(M)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

RAMP – Ramp Gain Adjustment

This command starts / stops the gain ramp for an input, output or assignable processing block. There is no query associated with this command.

Command Form: DEVICE RAMP <Channel> <Group> <Rate> [Target]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	1, 2, 3, 5, 7, 12, 16, 17 (I, J, O, M, P, L, F, T, R)
Rate	Signed Integer	1	-50 – 50	dB / s
			If value=0, the ramp will stop.
			If value< 0, the gain will ramp down.
			If value>0, the gain will ramp up.
Target	Signed Integer	1	-65 – 20	dB
			If NULL in text or 0x80 in binary, the ramp will use
			the channel’s maximum and minimum for a target.

263