ClearOne comm SR 1212, PRO TH20, PRO 8I operation manual 267

RXBSTEN – Receive Boost Enable

This command selects/reports the receive boost status.

Command Form: DEVICE RXBSTEN <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

SERECHO – Serial Echo

This command selects/reports the serial echo of the RS-232 port.

Command Form: DEVICE SERECHO [Value]

Argument	Type	Size	Values		Units
Value	Unsigned Integer	4	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

NOTE: The unit will return the updated state of the last selection in the same form as the command.

SFTYMUTE – Safety Mute

This command selects/reports the state of the safety mute. Safety mute holds all outputs in a muted state. It used for syncing to a site document to avoid feedback or blown speakers until the unit is in a settled state.

Command Form: DEVICE SFTYMUTE [Value]

Argument	Type	Size	Values		Units
Value	Channel	4	0	= off
			1	= on
			2	= toggle
			(Null to query in text)

SIGGEN – Signal Generator

This command selects/reports of the signal generator activation.

Command Form: DEVICE SIGGEN [Channel Group Type Amplitude Frequency]

Argument	Type	Size	Values			Units
Channel	Channel	1	See Groups and Channels
			(Null to query in text)
Group	Group	1	1, 3, 7 (I, M, L)
Type	Unsigned Integer	2	1	= Pink Noise
			2	= White Noise
			3	= Tone
Amplitude	Signed Float	4	-60.00 – 20.00			dB
Frequency	Unsigned Float	4	Type 1 – 2		0 (Null in text)	Hz
			Type 3		20.00 – 20000.00

SIGGENEN – Signal Generator Enable

This command selects/reports of the signal generator activation.

Command Form: DEVICE SIGGENEN [Value]

Argument	Type	Size	Values		Units
Value	Unsigned Integer	4	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

267