ClearOne comm SR 1212 Paflt PA Fault, Paimped PA Output Impedance, Palen PA Limiter Enable, 258

PAFLT – PA Fault

This indicates one of the power amplifier channels is in a FAULT condition. This is Read-Only, and is automatically generated if a fault occurs.

Command Form: DEVICE PAEQEN [Bitmap]

Argument	Type	Size Values
Bitmap	Hexadecimal Integer	4

PAIMPED – PA Output Impedance

This command selects the output impedance for the PA channel to be either 8 ohms or 70/100V. Command Form: DEVICE PIAMPED <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned	2	0	= 8 ohms
	Short		1	= 70/100V

(Null to query in text)

PALEN – PA Limiter Enable

This command changes enables the Limiter on a power amplifier channel.

Command Form: DEVICE PALEN <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Unsigned Short	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

PALT – PA Limiter Threshold

This command sets the Limiter threshold on a power amplifier channel.

Command Form: DEVICE PALT <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23 (J)
Value	Signed Float	2	-65.00 to +20.00	dB
			(Null to query in text)

258