ClearOne comm PRO TH20, PRO 8I, SR 1212 operation manual Tamode Telco Adapt Mode, 271

Argument	Type	Size	Values
Message	String	40	For the telephone on hook: the message will report the line
			voltage, the line current, other results, and if dial tone is
			detected.
			For the telephone off hook: the message will report the line
			current, other results, and if dial tone is detected.
			The bit mask for the other results is
			x x x x x x x x
			--> set if switched from CTR21 to FCC
			because of low current
			--> set if used DIAL bit while dialing
			--> set if switch from Low Voltage to Japan
			because of current
			--> set if switch from Low Voltage to FCC because
			of current
			--> DAA OVL status
			--> DAA DOD status
			--> DAA OPD status
			--> Not used
			For the network check: the box will report if no IP address is
			set. If it is set, the box will ping the gateway. The message
			will say the ping failed if it is not returned in 5 s. Otherwise,
			the message will report how many seconds it took to return
			the ping.

TAMODE – Telco Adapt Mode

This command selects/reports the Telco adapt mode.

Command Form: DEVICE TAMODE <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Value	Unsigned Integer	2	0	= Auto
			1	= Burst
			(Null to query in text)

271