BAUD – Baud Rate
This command selects/reports the baud rate of the serial port.
Command Form: DEVICE BAUD [Value]
Argument | Type | Size | Values | Units |
Value | Unsigned Integer | 4 | 9600, 19200, 38400, 57600, 115200 |
|
|
|
| (Null to query in text) |
|
CALLDUR – Call Duration
This command returns current call duration. If no call is active, this command returns 0. At the time of call termination, this command will automatically be sent out to report call duration. This command is read only.
Command Form: DEVICE CALLDUR <Channel> <Duration>
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See Groups and Channels |
|
Group | Group | 1 | 17 (R) |
|
Reserved |
| 2 | 0 |
|
Duration | String | 8 | String of format HR:MN:SS |
|
CALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command is reportable only. It cannot be queried or set.
Command Form: DEVICE CALLERID <Channel> <Number> <Argument>
Argument | Type | Size | Values | Units |
Channel | Channel | 1 | See Groups and Channels |
|
Group | Group | 1 | 17 (R) |
|
Reserved | Unsigned Integer | 2 | 0 |
|
Number | String | 16 | 1 – 16 chars |
|
Label | String | 16 | 1 – 16 chars |
|
CGROUP – Compressor Group Select
This command selects/reports the setting of the compressor group.
Command Form: DEVICE CGROUP <Channel> [Value]
Argument | Type | Size | Values | Units | |
Channel | Channel | 1 | See Groups and Channels |
| |
Group | Group | 1 | 5 | (P) |
|
Value | Unsigned Integer | 2 | 0 | = none | Compressor |
|
|
| 1 | – 4 | Group |
|
|
| (Null to query in text) |
| |
CHAIRO – Chairman Override Mode
This command selects/reports the setting of chairman override.
Command Form: DEVICE CHAIRO <Channel> [Value]
Argument | Type | Size | Values | Units | |
Channel | Channel | 1 | See Groups and Channels |
| |
Group | Group | 1 | 3 | (M) |
|
Value | Unsigned Integer | 2 | 0 | = Off |
|
|
|
| 1 | = On |
|
|
|
| 2 | = Toggle |
|
|
|
| (Null to query in text) |
| |
