ClearOne comm PRO TH20, PRO 8I, SR 1212 operation manual 265

RINGEREN – Audible Ring Enable

This command sends/reports the use of an audible ring.

Command Form: DEVICE RINGEREN <Channel> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Value	Unsigned Integer	2	0	= Off
			1	= On
			2	= Toggle
			(Null to query in text)

RINGERLVL – Audible Ring Level

This command selects/reports the audible ring’s level.

Command Form: DEVICE RINGERLVL <Channel> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Value	Signed Float	2	-12.00 – 12.00 (dB)
			(Null to query in text)

RINGERSEL – Audible Ring Melody Selection

This command sends/reports the audible ring melody.

Command Form: DEVICE RINGERSEL <Channel> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Value	Unsigned Integer	2	1 – 3
			(Null to query in text)

RINGERTEST – Audible Ring Melody Test

This command plays the current audible ringer melody. This command is executable only. There is no query.

Command Form: DEVICE RINGERTEST <Channel>

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)
Reserved	Unsigned Integer	2	0

RINGMOD – Ring Cadence Mode

This command sets the ring cadence to either standard mode or custom mode. The cadence can be set using the RINGON and RINGOFF commands. The country code should be set first using the COUNTRY command.

Command Form: DEVICE RINGMOD <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	17 (R)

265