ClearOne comm PRO 8I Devicesubtype Sets the Subtype of a Connected Device, Dfltm Default Meter

Reserved	Unsigned Integer	2	0
Label	String	12	1 – 12 characters
			CLEAR = clear the label
			(Null to query in text)

DEVICESUBTYPE – Sets the Subtype of a Connected Device

This command enables/disables or reports the current type of device connected to an input or output. Command Form: DEVICE DEVICESUBTYPE <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	1, 2, 3, 7 (I, O, M, L)
Value	Unsigned Integer	2	(NULL to query in text)

DEVICETYPE – Sets the Type of a Connected Device

This command enables / disables or reports the current type of device connected to an input or output. Command Form: DEVICE DEVICETYPE <Channel> <Group> [Value]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	1, 2, 3, 7 (I, O, M, L)
Value	Unsigned Integer	2	(NULL to query in text)

DFLTM – Default Meter

This command selects/reports the setting of the default meter on the front panel.

Command Form: DEVICE DFLTM [Channel Group Position]

Argument	Type	Size	Values	Units
Channel	Channel	1	See Groups and Channels
			(Null to query in text)
Group	Group	1	1, 2, 3, 7, 16, 17 (I, O, M, L, T, R)
Position	Meter Type	2	1 – 4, as applicable for group
			See Meter Type Definitions

Diag – Diagnostic Commands

This command is used to return status and diagnostic information. It is intended to be used as a text command only.

This is a query only command.

Command Form: DEVICE DIAG <Channel> <Group> [Value]

Argument	Type	Size	Values		Units
Channel	Channel	1	See Groups and Channels
Group	Group	1	23	(J)
Value	Unsigned	2	0 = List of current commands
	Short		(J) Power Amp
			1	= Fan/Temp
			2	= Noise Gate
			3	= Feedback Nodes
Information	String	80	Diagnostic String
			(ALWAYS NULL IN TEXT)

236