
Specifications - NAD 312 |
|
|
|
Continuous average power output into 8 |
| 25W (14dBW) | |
(Min power per channel, 20Hz - 20kHz both channels driven with no more than rated distortion) |
|
| |
Rated distortion (THD 20Hz - 20kHz) |
| 0.03% |
|
Clipping power (max continuous power per channel) |
| 40W |
|
IHF dynamic headroom at 8 |
| 3dB |
|
IHF dynamic power (max short term power per channel) | 8 | 50W (17.0dBW) | |
| 4 | 60W (17.8dBW) | |
| 2 | 75W (18.7dBW) | |
Damping factor (ref. 8 50Hz) |
| >60 |
|
Frequency response | 20Hz - 20kHz | ±0.3dB | |
| 3Hz/70kHz |
| |
THD (20Hz - 20kHz, from 250mW to rated power) |
| <0.03% | |
Input impedance (R and C) | Line inputs | 20k | /500pF |
| Phono input | 47k | /200pF |
Input sensitivity (ref. rated power) | Line inputs | 165mV | |
| Phono input | 2.7mV |
|
Signal to noise ratio (A weighted) |
| 90dB ref. 1W | |
|
| 104dB ref. rated power | |
Signal to noise ratio Phono (A weighted, with cartridge) |
| 77dB ref 5mV | |
Frequency response (20Hz - 20kHz) |
| ±0.5dB | |
Preamp output impedance |
| 220 |
|
Tape output impedance |
| Source Z + 2k | |
Headphones output impedance |
| 220 |
|
Treble control |
| ±7dB at 10kHz | |
Bass control |
| ±10dB at 50Hz | |
Physical specifications |
|
|
|
Dimensions (W x H x D) |
| 435 x 95 x 285mm | |
Net weight |
| 6kg |
|
Shipping weight |
| 7.5kg |
|
Power consumption |
| 160W |
|
NOTE: NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.