Introduction

Sending Command Programming Files to the Printer

Sending Command Programming Files to the Printer

Page Mode programming files can be sent to the printer from Windows operating systems by using the Zebra Firmware Downloader (found on the user’s CD or at www.zebra.com. In the DOS enviroment, use the Copy command at the command prompt. The easiest method is to use the Zebra Firmware Downloader to transfer files to the printer.

Transferring files with the Firmware Downloader

1.Install the printer. Verify communication is working properly by printing a Printer Configuration or Test using the printer's driver properties window. See Sending Commands Directly to the Printer on page 23 for more details.

2.Install the Zebra Firmware Downloader on your system.

3.Select Start > Programs > Zebra > Firmware Downloader.

4.From the Printer menu, select Auto-Detect.

25

12/16/13

EPL Programming Guide

14245L-003

Page 25
Image 25
Zebra Technologies 14245L-003 manual Sending Command Programming Files to the Printer