Zebra Technologies 14245L-003 manual Internalwired.ip.arpinterval, 233

SGD Wired Commands

internal_wired.ip.arp_interval

233

internal_wired.ip.arp_interval

Description This print server setting allows you to specify the ARP (Address Resolution Protocol) interval or the ARP cache time out for the internal wired print server. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 216.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the ARP interval or the
	ARP cache time out value for the internal wired print server.
	Format:
	! U1 getvar "internal_wired.ip.arp_interval"
setvar	This command instructs the printer to change the ARP interval or the ARP
	cache time out for the internal wired print server.
	Format:
	! U1 setvar "internal_wired.ip.arp_interval" "value"
	Values: 0 - 30
	Default: "0"

Example • This setvar example shows the value set to "0".

! U1 setvar "internal_wired.ip.arp_interval" "0"

What the setvar value is set to is the getvar result. In this example, the getvar result is "0".

12/16/13 EPL Programming Guide 14245L-003 Rev. A