Zebra Technologies 14245L-003 manual Externalwired.ip.port, 227, U1 setvar externalwired.ip.port

SGD Wired Commands

external_wired.ip.port

227

external_wired.ip.port

Description This printer setting refers to the external wired print server’s port number that the TCP print service is listening on. Normal TCP communications from the host should be directed to this port. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 216.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the external wired
	printer server’s TCP/UDP port number.
	Format: ! U1 getvar "external_wired.ip.port"
setvar	This command instructs the printer to set the external wired print server’s
	TCP/UDP port number.
	Format: ! U1 setvar "external_wired.ip.port" "value"
	Values: 1 - 65535 (excluding any ports currently used by other services,
	such as 21, 23, 80, and 515).
	Default: "9100"

Example • This setvar example shows the value set to "9100".

!U1 setvar "external_wired.ip.port" "9100"

When the setvar value is set to "9100", the getvar result is "9100".

12/16/13 EPL Programming Guide 14245L-003 Rev. A