SGD Wireless Commands

wlan.private_key_password

295

wlan.private_key_password

Description This printer setting allows the setting of the optional private key password. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands

Details

 

 

getvar

This command instructs the printer to respond with the value of the private

 

key password.

 

Format: ! U1 getvar "wlan.private_key_password"

 

For protection a single "*" prints.

 

 

setvar

This command instructs the printer to set the private key password.

 

Format: ! U1 setvar "wlan.private_key_password"

 

"value"

 

Values: A maximum of 32 alphanumeric characters

 

Default: ""

 

 

Example • This setvar example shows the value set to "password".

!U1 setvar "wlan.private_key_password" "password"

When the setvar value is set to "password", the getvar result is "*".

12/16/13

EPL Programming Guide

14245L-003 Rev. A

Page 295
Image 295
Zebra Technologies 14245L-003 manual Wlan.privatekeypassword, 295, U1 setvar wlan.privatekeypassword password