Zebra Technologies 14245L-003 manual Default Value Not used

EPL Commands

b

Parameters	Details
p5 =	x,y
	Associated MaxiCode symbol numbering where:
	x = Symbol Number of
	y = Total Number of Associated Symbols
	Accepted Values: 1-8 for both x or y
	Default Value: Not used
"DATA"=Mode dependent	Mode dependent data is bounded by quotation marks.
data format	Maximum of 2 KBytes of data.
		Mode	Data Format
	2 & 3		“cl,co,pc,lpm”
	4 & 6		“lpm”

cl = Class Code (3 digits required) co = Country Code (3 digits required)

Mode 2 = Numeric Characters

Mode 3 = International Characters (up to 6 characters) pc = Postal Code

Mode 2 = 5 or 9 characters

(All Numeric, including USA Postal ZIP 5 or 9 char.) For less than 9 characters, the printer will pad the field with 0’s.

Mode 3 (International)= Any alphanumeric character (up to 6 characters)

lpm = Low priority message (data)

ASCII printable characters (up to 84 characters per symbol), any 256 character map.

The programmer should rely on the symbology’s specification to insure format compliance and proper implementation. See the AIM web site for specifications at: http://www.aimglobal.org/

73

12/16/13 EPL Programming Guide 14245L-003 Rev. A