EPL Commands
US
160
14245L-003 Rev. A EPL Programming Guide 12/16/13
Parameters This table identifies the parameters for this format:
Parameters Details
p1 = 1 (Optional
Parameter)
If no errors occur, the printer will echo ACK(0x6) after each
label that is successfully printed/dispensed.
Code Error/Status Description
00 No Error
01 Syntax Error
02 Object Exceeded Label Border
03 Bar Code Data Length Error (e.g.: EAN-13 is a 12 or 1 digit only)
04 Insufficient Memory to Store Data
05 Memory Configuration Error
06 RS-232 Interface Error
07 Paper or Ribbon Empty
08 Duplicate Name: Form, Graphic or Soft Font
09 Name Not Found: Form, Graphic or Soft Font
10 Not in Data Entry Mode (See ? Command)
11 Printhead Up (Open)
12 Pause Mode or Paused in Peel Mode
13 Mobile Printers: Print head too hot
14 Mobile Printers: Motor too hot
15 Mobile Printers: Battery low warning ( 40%)
16 Mobile Printers: Battery low limit ( 20%)
50 Printer Busy - Processing Print Job
84 Media Error or Blackline not detected
93 PDF-417 coded data too large to fit in bar code