Zebra Technologies 14245L-003 manual Set Double Buffer Mode, Syntax rp1

142

EPL Commands

r

r

Set Double Buffer Mode

Description Use this command to disable or reenable the double buffer image (label) printing. The double buffer feature is a automatically tested and set by the q and Q commands.

Mobile printers, such as the TR 220, ignore this command and automatically set the printer to single buffer mode.

Syntax rp1

Parameters This table identifies the parameters for this format:

Parameters		Details
p1	= Enable/disable	Accepted Values:
	double buffer mode	N = Disable double buffer mode
		Y = Re-enable the double buffer mode if the printer
		memory supports the image buffer size set by Q and q
		parameters
		Note • The rN command must follow the q and Q
		commands in a form (label) program.
		Verify the image buffer status with the U command(s).
		See Explanation of the Status Printout on page 36 for
		a sample of the Dump Mode Printout.

14245L-003 Rev. A EPL Programming Guide 12/16/13