Zebra Technologies 14245L-003 manual Wlan.ip.arpinterval, 272, U1 setvar wlan.ip.arpinterval

272

SGD Wireless Commands

wlan.ip.arp_interval

wlan.ip.arp_interval

Description This print server setting allows you to specify the ARP (Address Resolution Protocol) interval or the ARP cache time out for the wireless print server. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the ARP interval or the
	ARP cache time out value (in seconds) for the wireless print server.
	Format: ! U1 getvar "wlan.ip.arp_interval"
setvar	This command instructs the printer to respond with the ARP interval or the
	ARP cache time out value for the wireless print server.
	Format: ! U1 setvar "wlan.ip.arp_interval" "value"
	Values: 0 to 30 seconds
	Default: "0"

Example • This setvar example shows the value set to "0".

! U1 setvar "wlan.ip.arp_interval" "0"

What the setvar value is set to is the getvar result. In this example, the getvar result is "0".

14245L-003 Rev. A EPL Programming Guide 12/16/13