Zebra Technologies 14245L-003 manual B10,10,0,PL,5,5,5,N,12-34567-890123

54

EPL Commands

B

Bar Code Table Notes

1.Hyphens maybe used in data as a data separator and will be ignored.

2.Use ASCII 06 to delimit variable length fields.

3.Japanese Postal Code accepts alpha-numeric characters. It truncates the data after 20 characters, and pads up to 20 with a pad character.

4.The data for a Deutsche Post Code 128 barcode consists of 12 characters: BBNNNNNNNNDE, where B is any character in the ‘B’ character set, N is any decimal digit (‘0’ – ‘9’), and DE are the literal characters “DE” (Germany). A 1D bar code type creates a standard Code 128 symbol, but the firmware calculates and inserts a check digit between the last N and the DE before rendering the bar code. It will abort and report a syntax error if any of the 8 characters between AA and DE are not digits. It will, however, allow any number of function codes F1 through F3 to be interspersed with the digits.

5.Planet: See USPS Publication 197 for details. Either 11 or 13 digits may be supplied, and the printer calculates and appends a check digit for a total of 12 or 14 digits. As with Postnet, hyphens (‘-’) may be used as data separators for readability and will be discarded by the printer.

Example 1 •

B10,10,0,PL,5,5,5,N,"12-34567-890123"

Example 2 •

N↵

B10,10,0,3,3,7,200,B,"998152-001"↵

P1↵

produces this label:

14245L-003 Rev. A EPL Programming Guide 12/16/13