Zebra Technologies 14245L-003 manual Ip.pop3.username, 194, U1 setvar ip.pop3.username user

194

SGD Printer Settings

ip.pop3.username

ip.pop3.username

Description This printer setting refers to the POP3 user name. This only applies if the "ip.pop3.enable" is set to on. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 638.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the POP3 user name.
	Format: ! U1 getvar "ip.pop3.username"
setvar	This command instructs the printer to change the POP3 user name.
	Format: ! U1 setvar "ip.pop3.username" "value"
	Values: A maximum of 20 alphanumeric characters
	Default: " "

Example • This setvar example shows the value set to "user".

! U1 setvar "ip.pop3.username" "user"

When the setvar value is set to "user", the getvar result is "user".

14245L-003 Rev. A EPL Programming Guide 12/16/13