270

SGD Wireless Commands

wlan.firmware_version

wlan.firmware_version

Description This command refers to the firmware version of the wireless radio card. For printer support, see SGD Command Support on page 315.

Type getvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands

Details

 

 

getvar

This command instructs the printer to respond with the current version of

 

the wireless radio card firmware.

 

Format: ! U1 getvar "wlan.firmware_version"

 

 

Example • In this example, the getvar result is the version of Symbol 4137 card (for example, "F3.91-69").

! U1 getvar "wlan.firmware_version"

14245L-003 Rev. A

EPL Programming Guide

12/16/13

Page 270
Image 270
Zebra Technologies 14245L-003 manual Wlan.firmwareversion, 270, U1 getvar wlan.firmwareversion