Zebra Technologies 14245L-003 manual Wlan.wep.keyformat, 313, U1 setvar wlan.wep.keyformat ascii

SGD Wireless Commands

wlan.wep.key_format

313

wlan.wep.key_format

Description This printer setting specifies the format for the WEP key. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Important • This printer setting should proceed any of the wep.key settings if you select a non-default value.

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to respond with the WEP key format.
	Format: ! U1 getvar "wep.key_format"
setvar	This command instructs the printer to set the WEP key format.
	Format: ! U1 setvar "wlan.wep.key_format" "value"
	Values:
	"ascii" = WEP key is set by ASCII string
	"hex" = WEP key is a Hex string
	Default: "hex"

Example • This setvar example shows the value set to "ascii".

! U1 setvar "wlan.wep.key_format" "ascii"

When the setvar value is set to "ascii", the getvar result is "ascii".

12/16/13 EPL Programming Guide 14245L-003 Rev. A