Zebra Technologies 14245L-003 manual Print Head History Report, 332, Syntax URHp1,p2

332

Print Meter for 2746e and G-Series

URH

URH

Print Head History Report

Description Use this command to print or report (via the serial or USB interface) a print head history report of the distance printed by the last twenty (20) recorded print heads or the last ten (10) recorded print heads if the RTC is in use.

Syntax URH[p1,p2]

Parameters This table identifies the parameters for this format. Parameters are optional and maybe entered and any order.

Parameters		Details
p1	= Report Method	Sends information back to the host via the serial port and the
	(device)	last active bi-directional interface.
		p = Printer
		s = Serial
		Default Value: s
p2	= Units	m = Millimeters
		i = Inches

Example • (default)

)&"%
-*'&
)*4503:

'03
4/
9999999999


4&3*"-
/6.#&3
.*4."5$)







%*45"/$&


999999999


<999
EBZT> 
999999999


<999
EBZT> 
999999999


<999
EBZT> 
999999999

For units with the RTC option installed: The **SERIAL NUMBER MISMATCH ** line prints when the serial number stored in the RTC does not match the serial number stored on the printer’s main PCBA. One or both the PCBA or RTC has been changed in this unit and the odometer data does not accurately represent printer usage.

The last print head record does not include the number of days in service.

Note • Depending on your printer model, your printout may vary from this example.

14245L-003 EPL Programming Guide 12/16/13