Zebra Technologies 14245L-003 manual Wlan.signalnoise, 300, U1 getvar wlan.signalnoise

300

SGD Wireless Commands

wlan.signal_noise

wlan.signal_noise

Description This command returns the signal noise on the wireless network. Values above 40% represent a very significant noise, and radio communication is not reliable. For printer support, see SGD Command Support on page 315.

Type getvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the command for this format:

Commands	Details
getvar	This command instructs the printer to return the current signal noise on the
	wireless network.
	Format: ! U1 getvar "wlan.signal_noise"

Example • In this example, the getvar result is the current signal_noise value.

! U1 getvar "wlan.signal_noise"

14245L-003 Rev. A EPL Programming Guide 12/16/13