Zebra Technologies Understanding Zebra Timeout Checking for Wireless Print Servers

SGD Wireless Commands

wlan.ip.timeout.enable

283

wlan.ip.timeout.enable

Description This network setting refers to enabling the connection timeout on the wireless print server. For this to take effect, the print server must be reset. For printer support, see SGD Command Support on page 315.

Type getvar; setvar

Note • For details on SGD command structure, see Command Structure on page 250.

This table identifies the commands for this format:

Commands	Details
getvar	This command instructs the printer to return whether the timeout checking
	is enabled on the wireless print server.
	Format: ! U1 getvar "wlan.ip.timeout.enable"
setvar	This command instructs the printer to enable or disable the timeout
	checking on the wireless print server.
	Format: ! U1 setvar "wlan.ip.timeout.enable" "value"
	Values:
	"off" = turns off the connection checking
	"on" = turns on the connection checking
	Default: "on"

Example • This setvar example shows the value set to "on".

!U1 setvar "wlan.ip.timeout.enable" "on"

When the setvar value is set to "on", the getvar result is "on".

12/16/13 EPL Programming Guide 14245L-003 Rev. A