Cisco Systems WSC2960X48TDL manual Configuring Lldp Characteristics

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP Characteristics

	Command or Action	Purpose
	gigabitethernet2/0/1
Step 4	lldp transmit	Enables the interface to send LLDP packets.

Example:

Switch(config-if)# lldp transmit

Step 5 lldp receive Enables the interface to receive LLDP packets.

Example:

Switch(config-if)# lldp receive

Step 6 end Returns to privileged EXEC mode.

Example:

Switch(config-if)# end

Step 7 show lldp Verifies the configuration.

Example:

Switch# show lldp

Step 8 copy running-config startup-config (Optional) Saves your entries in the configuration file.

Example:

Switch# copy running-config startup-config

Configuring LLDP Characteristics

You can configure the frequency of LLDP updates, the amount of time to hold the information before discarding it, and the initialization delay time. You can also select the LLDP and LLDP-MED TLVs to send and receive.

Beginning in privileged EXEC mode, follow these steps to configure the LLDP characteristics.

Note Steps 2 through 5 are optional and can be performed in any order.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 57