SanDisk SSD 5000 manual Physical Characteristics, Mechanical, Mounting Instructions

SSD SATA 5000 2.5"	Product Manual
	Rev 0.7

4.Physical Characteristics

4.1Mechanical

Table 6: SanDisk SSD SATA 5000 2.5” Mechanical Dimensions and Weight

Parameter	Specifications
Width	69.85 ± 0.25 mm
Height	9.5 ± 0.2 mm
Length	102.0 ± 0.25 mm
Maximum Weight	96 gr

4.2Mounting Instructions

Before unpacking and installing the drive, take anti-static measures in order to avoid damage to the drive. The drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. The following guidelines are recommended:

Keep the drive in ESD bag until the drive is ready to be installed. Wear an ESD-proof wrist strap when handling the drive.

Avoid touching the drive’s connector. Handle the drive using its edge or frame.

Rest the drive on an antistatic surface until mounting it.

Handle the drive carefully, taking care not to drop or bang it against other objects.

Do not remove, damage or cover any product labels. Removal of such labels voids the warranty.

The ambient temperature at the top cover should not exceed the maximum operating temperature of the drive.

Exercise caution when removing the drive from the host as the drive may have heated up.

The recommended mounting screw torque is 0.675Nm.

The recommended mounting screw depth is 4.0mm (0.157in) for bottom for horizontal mounting.

© 2008 SanDisk® Corporation 8 July 2008, Document No. 80-11-01488