SSD SATA 5000 2.5"

Product Manual

 

Rev 0.7

7.Interface

7.1Supported Standards

The SSD complies with the following standards:

ATA/ATAPI-7: ANSI INCITS 397-2005, AT Attachment with Packet Interface-7.

Serial ATA Revision 2.5 Specification (Ratification Date: October 27, 2005).

7.2Interface Connector Characteristics

Table 15: SanDisk SSD SATA 5000 2.5” Connector Characteristics

Parameter

Specifications

Drive Connector

FCI, 10039651-001LF

Mating/Unmating force

The force to mate a receptacle connector

 

and compatible plug connector should not

 

exceed 45N (4.6kgf)

 

The unmating force should not be less than

 

10N (1.0kgf)

Durability

5,000 cycles

7.3Hotplug Support

The SSD supports hotplug operation per SATA 2.5 specification.

7.4SATA Bridge Support

The SSD supports Marvell’s Serial ATA bridge (P/N: 88SA8040).

7.5Interface Connector Drawing

Figure 3: Interface Connector View

© 2008 SanDisk® Corporation

14

July 2008, Document No. 80-11-01488

Page 14
Image 14
SanDisk SSD 5000 manual Interface