Ordering Information | SanDisk SSD 5000 guide

SSD SATA 5000 2.5"	Product Manual
	Rev 0.7

9.Ordering Information

SD	SanDisk

I	Interface:
	S – SATA
G	Generation:
	5 – 5000 (5th)
F	Form factor:
	C – 2.5" (9.5mm)
CCC	Capacity (GB):
	008
	016
	032
	064

U	Units:
	G (GB)
XXXX	Customer code reference
G	Component generation
	0 – Initial generation, Commercial Temperature.
	1 -	first generation, Commercial Temperature
	E -	first generation, Enhanced Temperature Support (-25˚C to 75˚C)

Y	Change code

July 2008, Document No. 80-11-01488

Image 19

Contents

Preliminary, Rev Product Manual Table of Contents Supported ATA Commands Introduction Key FeaturesGeneral Description SanDisk SSD Sata 5000 2.5 Block Diagram Block Diagram Capacity General Product SpecificationsThis datasheet refer to the 8, 16, 32, 64GB version Interface Supply Voltage Power CharacteristicsPower Consumption Power Consumption Efficiency Mounting Instructions Physical CharacteristicsSanDisk SSD Sata 5000 2.5 Mechanical Dimensions and Weight Mechanical SanDisk SSD Sata 5000 2.5 Mechanical Drawing Installation Orientation Vibration Environmental SpecificationsTemperature Humidity SSD does not generate any acoustic noise 0dB AltitudeAcoustics Regulations Parameter Standard Directive 73/23/ECC for product safety Directive 89/336/EECRoHS FCC 47CFR part 15 subpart B class B Product Life Reliability CharacteristicsError Rate Preventive Maintenance Interface DAS Pin AssignmentSanDisk SSD Sata 5000 2.5 Pin Assignment Pin Function Description Set Features Supported ATA CommandsCommand Name Command Code ATA standard power management commands ATA standard Security commands Bios Setup Troubleshooting Basic ChecksSlow Drive Performance Example SanDisk SSD Sata 5000 2.5 64GB SDS5C-064G-000010 Ordering InformationSanDisk SSD Sata 5000 2.5 Ordering Information SSD Sata 5000