Cisco Systems WSC2960X48TDL Returns to global configuration mode, interface interface-id, Purpose

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring Location TLV and Wired Location Service

	Command or Action	Purpose
Step 3	exit	Returns to global configuration mode.
	Example:
	Switch(config-civic)# exit
Step 4	interface interface-id	Specifies the interface on which you are configuring the location
		information, and enter interface configuration mode.
	Example:
	Switch (config)# interface gigabitethernet2/0/1

Step 5 location {additional-location-information word civic-location-id {id host} elin-location-id id custom-location-id {id host} geo-location-id {id host} }

Example:

Switch(config-if)#location elin-location-id 1

Enters location information for an interface:

•additional-location-information—Specifies additional information for a location or place.

•civic-location-id—Specifies global civic location information for an interface.

•elin-location-id—Specifies emergency location information for an interface.

•custom-location-id—Specifies custom location information for an interface.

•geo-location-id—Specifies geo-spatial location information for an interface.

•host—Specifies the host location identifier.

•word—Specifies a word or phrase with additional location information.

• id—Specifies the ID for the civic, ELIN, custom, or geo location. The ID range is 1 to 4095.

Step 6 end Returns to privileged EXEC mode.

Example:

Switch(config-if)# end

Step 7 Use one of the following: Verifies the configuration.

•show location admin-tag string

•show location civic-location identifier id

•show location elin-location identifier id

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 65