Cisco Systems WSC2960X48TDL manual Lldp med-tlv-select End Copy running-config startup-config

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP-MED TLVs

LLDP-MED TLV	Description
location	LLDP-MED location TLV
network-policy	LLDP-MED network policy TLV
power-management	LLDP-MED power management TLV

Beginning in privileged EXEC mode, follow these steps to enable a TLV on an interface:

SUMMARY STEPS

1.configure terminal

2.interface interface-id

3.lldp med-tlv-select

4.end

5.copy running-config startup-config

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters global configuration mode.
	Example:
	Switch# configure terminal

Step 2 interface interface-id

Example:

Switch(config)# interface

gigabitethernet2/0/1

Specifies the interface on which you are configuring an LLDP-MED TLV, and enter interface configuration mode.

Step 3 lldp med-tlv-select Specifies the TLV to enable.

Example:

Switch(config-if)# lldp med-tlv-select inventory management

Step 4 end Returns to privileged EXEC mode.

Example:

Switch(config-if)# end

	Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
60	OL-29034-01