Cisco Systems WSC2960X48TDL manual Configuring Auto-MDIX, Configuring Ethernet Management Port

Contents

C H A P T E R 3

C H A P T E R 4

C H A P T E R 5

Adding a Description to an Interface: Example 36

Identifying Interfaces on a Stack-Capable Switch: Examples 36

Configuring a Range of Interfaces: Examples 36

Configuring and Using Interface Range Macros: Examples 37

Setting Interface Speed and Duplex Mode: Example 37

Configuring the Console Media Type: Example 37

Configuring the USB Inactivity Timeout: Example 38 Additional References for the Interface Characteristics Feature 38

Feature History and Information for Configuring Interface Characteristics 39

Configuring Auto-MDIX41

Prerequisites for Auto-MDIX41

Restrictions for Auto-MDIX41

Information about Configuring Auto-MDIX42

Auto-MDIX on an Interface 42

How to Configure Auto-MDIX42

Configuring Auto-MDIX on an Interface 42

Monitoring Auto-MDIX43

Example for Configuring Auto-MDIX44

Configuring Ethernet Management Port 45

Finding Feature Information 45

Prerequisites for Ethernet Management Ports 45

Information about the Ethernet Management Port 45

Ethernet Management Port Direct Connection to a Switch 46

Ethernet Management Port Connection to Stack Switches using a Hub 46 Supported Features on the Ethernet Management Port 46

How to Configure the Ethernet Management Port 47

Disabling and Enabling the Ethernet Management Port 47

Additional References 48

Configuring LLDP, LLDP-MED, and Wired Location Service 51

Finding Feature Information 51

LLDP, LLDP-MED, and Wired Location Service Overview 51

LLDP 51

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 v