Cisco Systems WSC2960X48TDL manual Configuring Network-Policy TLV Examples

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuration Examples for LLDP, LLDP-MED, and Wired Location Service

	Command or Action	Purpose
Step 2	nmsp enable	Enables the NMSP features on the switch.
	Example:
	Switch(config)# nmsp enable

Step 3	nmsp notification interval {attachment location}
	interval-seconds

Example:

Switch(config)# nmsp notification interval location 10

Step 4 end

Example:

Switch(config)# end

Specifies the NMSP notification interval.

attachment—Specifies the attachment notification interval.

location—Specifies the location notification interval.

interval-seconds—Duration in seconds before the switch sends the MSE the location or attachment updates. The range is 1 to 30; the default is 30.

Returns to privileged EXEC mode.

Step 5 show network-policy profile Verifies the configuration.

Example:

Switch# show network-policy profile

Step 6 copy running-config startup-config (Optional) Saves your entries in the configuration file.

Example:

Switch# copy running-config startup-config

Configuration Examples for LLDP, LLDP-MED, and Wired Location Service

Configuring Network-Policy TLV: Examples

This example shows how to configure VLAN 100 for voice application with CoS and to enable the network-policy profile and network-policy TLV on an interface:

Switch# configure terminal

Switch(config)# network-policy 1

Switch(config-network-policy)# voice vlan 100 cos 4

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 67