Alcatel Carrier Internetworking Solutions 350I manual pptp ifconfig, Example, Related Commands

7 PPTP Commands

pptp ifconfig

Configure an existing PPTP interface.

SYNTAX:

pptp ifconfig	intf = <vp*vcname>
	[rate = <number{10-10000}>]
	[encaps = <{vcmuxnlpid}>]
	[ac <{neveralwayskeep}>]
intf	The PPTP interface to configure		REQUIRED
	Typically a phonebook name.
[rate]	A number between 10 and 10000 (Kilobits per second).		OPTIONAL
	Indicates the (maximum) transmission speed on the WAN link.
[encaps]	The type of encapsulation to be used for the relayed PPPoA interface.		OPTIONAL
	Choose between:
	G	vcmux (default)
	G	nlpid
[ac]	Before relaying the encapsulated PPP frames over the PPPoA link,		OPTIONAL
	make sure that the address and control field (0xFF03) is always in
	front of the frames (always), make sure the address and control field
	will never be found in front of the frames (never) or do not change
	the frames arriving via the PPTP tunnel (keep).
	By default the address and control field is never sent (compliant to
	RFC2364). It is recommended to keep this setting.

EXAMPLE:

=>pptp iflist
C:#		Name	VP	VC	Rate	Encap	AC	Usage [by]
0		RELAY_PPP1 8		48	0K	vcmux	never	DEFINED
1		RELAY_PPP2 8		49	0K	vcmux	never	DEFINED
2		RELAY_PPP3 8		50	0K	vcmux	never	DEFINED
3		RELAY_PPP4 8		51	0K	vcmux	never	DEFINED
4		Test	8	52	6000K	nlpid	keep	DEFINED
=>pptp ifconfig intf=Test rate=2ooK encaps=vcmux ac=always
=>pptp iflist
C:#		Name	VP	VC	Rate	Encap	AC	Usage [by]
0		RELAY_PPP1 8		48	0K	vcmux	never	DEFINED
1		RELAY_PPP2 8		49	0K	vcmux	never	DEFINED
2		RELAY_PPP3 8		50	0K	vcmux	never	DEFINED
3		RELAY_PPP4 8		51	0K	vcmux	never	DEFINED
	4	Test	8	52	200K	vcmux	always	DEFINED
=>

RELATED COMMANDS:
pptp ifadd	Add a PPTP interface.
pptp ifdelete	Delete a PPTP interface.
pptp iflist	Show current PPTP interfaces.
112 / 138		3EC 16982 AGAA TCZZA Ed. 01