3 DHCP Commands
dhcp policy
Set SpeedToucht350i DHCP server policy.
SYNTAX:
dhcp policy | [verifyfirst = <yesno>] |
|
| [trustclient = <yesno>] |
|
| [spoofing] |
|
| [client = <yesno>] |
|
|
|
|
[verifyfirst] | Probe the network for conflicting IP addresses before giving a | OPTIONAL |
| suggested IP address to the requesting DHCP client (yes) or not (no). |
|
[trustclient] | Take the IP address suggested by a DHCP client into account (yes) or | OPTIONAL |
| not (no). |
|
[spoofing] | Do not use this parameter. | OPTIONAL |
[client] | Allow the SpeedToucht350i DHCP server to present itself as DHCP | OPTIONAL |
| client (AutoDHCP mode) at boot time and probe for another DHCP |
|
| server on the network for some time before starting the DHCP server |
|
| (yes) or immediately start the DHCP server (no). |
|
EXAMPLE:
=>dhcp status
DHCP Server Status: Running Current configuration:
.....
Policies:
Verify first:no Trust client:yes Spoofing: no
Start as client: yes
.....
=>dhcp policy verifyfirst=yes trustclient=no client=no =>dhcp status
DHCP Server Status: Running Current configuration:
.....
Policies:
Verify first:yes
Trust client:no
Spoofing: no
Start as client: no
.....
=>
RELATED COMMANDS: |
|
dhcp status | Show current DHCP server configuration. |
3EC 16982 AGAA TCZZA Ed. 01 |
| 49 / 138 |
|
|
|