8 Software Commands
software switch
Switch active and passive versions and reboot the SpeedToucht350i.
Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save the current configuration if needed, e.g. by executing the config save command prior to executing a software switch.
SYNTAX:
software switch
EXAMPLE:
=>Software version |
|
| ||
Active | : | Sascha3.254 | Passive : | Sascha3.280 |
=>software switch |
|
| ||
..... |
|
|
|
|
(after reboot and | ||||
..... |
|
|
|
|
=>Software version |
|
| ||
Active | : | Sascha3.280 | Passive : | Sascha3.254 |
=> |
|
|
|
|
RELATED COMMANDS: |
|
software version | Show active and passive software versions. |
system reboot | Reboot the SpeedToucht350i. |
3EC 16982 AGAA TCZZA Ed. 01 |
| 121 / 138 |
|
|
|