Accessing the Command Line Interface
Endusers can access the Command Line Interface via a Telnet session. However, this requires that TCP/IP connectivity exists between the host from which the Telnet session is opened and the SpeedToucht350i.
Access via a Telnet Session
As soon a session to the CLI is opened, the SpeedToucht350i banner pops up, followed by the CLI prompt.
In case the SpeedToucht350i is protected by a System password authentication will be required before access is granted.
The following figure shows an example of the SpeedToucht350i banner after opening a Telnet session and authentication.
EXAMPLE:
/home/doejohn{1}$ telnet 10.0.0.138 Trying 10.0.0.138...
Connected to 10.0.0.138. Escape character is '^]'. User :
SpeedTouch (00±90±D0±00±01±23±45) Password : ######
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
*
* |
|
| ______ |
|
* |
| ___/_____/\ |
| |
* | / |
| /\\ | Alcatel Speed Touch(TM)350i |
* | _____/__ | / \\ | ADSL Modem for ISDN | |
* | _/ | /\_____/___ \ | Version R3.2 | |
* | // | / \ | /\ \ | |
* |
| _______//_______/ | \ | / _\/____ | Copyright (c) 1999±2001 Alcatel | |||||
* |
| / | / \ | \ | / | / / | /\ |
| ||
* __/ |
| / \ | \ / | / / | / _\__ |
| ||||
* | / / | / |
| \_______\/ |
| / / | / / | /\ |
| |
* /_/______/___________________/ /________/ /___/ | \ | |||||||||
* \ \ | \ |
| ___________ |
| \ \ | \ \ | \ | / | ||
* | \_\ | \ | / |
| /\ |
| \ \ | \ \___\/ |
| |
* | \ |
| \/ |
| / | \ | \ \ | \ | / |
|
* |
| \_____/ |
| / | \ | \ \________\/ |
|
| ||
* |
| /__________/ | \ | \ | / |
|
| |||
* |
| \ |
| _____ | \ | /_____\/ |
|
|
| |
* |
|
| \ / | /\ | \ | /___\/ |
|
|
| |
* |
|
| /____/ | \ \ | / |
|
|
|
| |
*\ \ /___\/
* | \____\/ |
* |
|
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
=>
3EC 16982 AGAA TCZZA Ed. 01 |
| 9 / 138 |
|
|
|
